SHD-181412F Shield Assembly With 14″ x 11¾” x 3/16″ Flat Shield and 18″ Snake Arm For Bench / Pedestal Grinders

Description

Each flat snake-arm shield assembly consists of a flat polycarbonate shield that is 3/16″ thick (0.177″ ± 10%), a shield bracket assembly, a snake arm with a direct-mount base, and mounting hardware. The direct-mount base can be fastened to most any flat surface at least 2″ x 1″ with the included mounting hardware (two ¼”-20 x ¾” hex socket-head cap screws, two ¼”-20 nylon-insert hex locknuts, and two No. 12 pan-head Phillips x 1″ zinc-plated sheet-metal screws).

Optional mounting bases and brackets can be added to the direct-mount base to provide additional mounting flexibility. There is a magnetic base, C-clamp base, and horizontal and vertical right-angle brackets. The magnetic base consists of a 3¼”-diameter magnet with 100 pounds of holding force. The C-clamp base can be mounted to a table or ledge up to 1 7/8″ thick. The horizontal and vertical right-angle brackets can be helpful in positioning the shield where you need it depending on the position the base is to be mounted.

Our flat snake-arm shields are proudly made in the United States of America!